chinese_simplified english italian
Home arrow Install and Configure arrow Let VPN-X Server support iPhone, Android, Windows Mobile...

Let VPN-X Server support iPhone, Android, Windows Mobile...

domenica, 03 aprile 2011

All smart mobilephone has built-in VPN Client, VPN-X server can support those VPN clients. The precondition is you need to prepare a Mac OS X Leopard(or above) to install VPN-X server.

For example, you can use Apple Mac mini to install VPN-X server.  You need not purchase Mac Server, because VPN-X server is doing what the Mac Server can do on VPN field.

  • VPN-X Server Setup

Please use the the PPTP configuration:

If you need to use iPhone to access remote Mac or PC at server side(you can also use the remote server IP to surf Internet. For example, you are in UK, but you want to let iPhone use USA home IP to access Internet), please set route configuration like this:

en0 is the real network interface to access Internet or LAN.

  • PPTP VPN Client Setup

iPhone/"iPot Touch" PPTP VPN Setup :

1. From the home screen, tap on ‘Settings’, scroll down to ‘General’ then tap on ‘Network’.
2. Tap on ‘VPN’ then ‘Settings’
3. Choose ‘PPTP’
4. Enter the IP address or DNS of your computer running VPN-X server.If the server is behind a router, you should do port mapping on router for 1723 tcp port , this port is standard port for pptp protocol.
5. Enter the username you created on VPN-X server "User Management" panel
6. Make sure ‘RSA SecurID’ is turned ‘OFF’
7. Enter the password
8. Choose ‘Maximum’ or 'Auto' for the ‘Encryption Level’
9. Turn ‘Send all traffic’ ON
10. Leave the ‘Proxy’ off unless you know of any reason for you to use one.
11. Tap ‘Save’
12. Use the ON/OFF slider to control the VPN connection either from this menu or from the main ‘Settings’ menu Configuring

Andriod PPTP VPN Setup

1. Go to “Settings” on your mobile phone, and select “Wireless & Network”
2. Select “VPN settings”
3. Select “Add VPN”
4. Select “Add PPTP VPN”
5. Set a “VPN name” as you like, and Set VPN server as what your IP address or DNS of your computer running VPN-X server is.If the server is behind a router, you should do port mapping on router for 1723 tcp port , this port is standard port for pptp protocol.
6.Then save the setting.
7.Go to “Settings” on your mobile phone, and select “Wireless Controls”
8. Select “VPN settings”
9. Connect to the VPN network you just set up
10. Key in your username and password, then click “Connect”
11. Once there is a small key-like icon on the left side of your notification bar, your phone is connected to the VPN.

Windows Mobile PPTP VPN Setup

1.Click Start button, click Settings
2.Switch to connections tab, click Connections once again
3.Click 'Add new VPN server connection'
4.Choose any name for your vpn connection, and for Host name/IP enter IP or DNS as what your VPN-X server is, choose PPTP for VPN type, click Next
5.Enter username and password you created on VPN-X server "User Management" panel, and leave domain empty.
6.Switch to Servers tab and make sure you have all fields empty, and select "User server-assigned addresses". Click Ok and finish.
7.Click 'edit my vpn servers' again
8.Tap the new connection and hold it, then choose Connect in the popup menu


Ultimo aggiornamento domenica, 10 aprile 2011

Menu Principale

Home Download User Manual FAQs
All rights reserved.
Copyright (C) 2006-2017 BirdsSoft - Web by Amigamerlin